Tranzeo TR5 Series Wireless Bridges - http://www.tranzeo.com

The TR-5a series is one of Tranzeo’s newer generation of 5.8GHz product lines. Radios and systems described below are powered by a 13 dBm radio. These are integrated fully functioning radios, which means they can be configured as an Access Point, a Point -to-Point Bridge, or a Client Adapter (CPE).

The Tranzeo is a low cost point to point wireless bridge with enterprise features and realibility. They are capable of running voice and data across the bridge providing a real alternitave to leased line or LAN extention.

Tranzeo TR5 Series Key Features:

• Dual Ethernet ports allow for "Daisy Chainging" of multiple radios
• 802.11 a/g modes supported
• 5, 10 & 20 MHz channel width selectivity
• Tunnel Protocol Support (VPN, PPTP, RSA, etc)
• Wireless Distribution System (WDS)
• Security (WEP, WPA, MAC Authentication)
• Status LEDs (in Access Point mode)
• Alignment LEDs (in Client Adapter mode)
• Client NAT Routing with QoS (Quality of Service)
• SNMP Support
• OFDM Technology
• Throughput of up to 22 Mbps can be achieved with a good line-of-sight environment
• Includes: PoE, Boot-cover, Mounting Kit (Dual Ethernet Boot Cover Optional)

Dual Ethernet Ports
This allows you to daisy-chain radios at your installation
sites (depending on power requirements). Perfect for back
to back point to point scenarios. Also great for installing
peripheral Power over Ethernet devices like weather
monitoring or security cameras.

Access Point Features:
Wireless Distribution System (WDS)
WDS allows Access Points to be wirelessly connected to each other while also servicing clients

Wi-Fi Protected Access (WPA)
WPA improves on the security features of WEP. It includes improved
data encryption (AES) and user authentication.

WPA and WEP LEDs
Outside LEDs allow you to easily see if WEP or WPA is activated on
your Access Point.

Client Adapter (CPE) Features:
Alignment LEDs
Now you can align your client and point to point installations without
having to log into the radio. Get visual signal strength at a glance by
using this great feature.

Controllable High Gain Output
All radios have +13dBm of output. Power can be scaled back for closer installations to avoid noise issues
and to meet local regulatory requirements.

If you would like more information about a Tranzeo Solution please use the contact us page or give us a call.