Motorola PTP 600 Series
 |
| PTP 600 Series Conectorised |
The Motorola PTP 600 Series point-to-point 5.4 GHz and 5.8 GHz wireless Ethernet bridges provide more range and capacity in near- and non-line-of-sight (NLoS) environments, delivering carrier-grade service (up to 99.999% availability). Motorola combines Multiple-Input Multiple-Output (MIMO) and Intelligent Orthogonal Frequency Division Multiplexing with advanced signal-processing algorithms, allowing PTP 600 Series solutions to create four simultaneous signals between pairs of transceivers at each end of the link – without losing spectrum efficiency. This technique increases signal integrity by an unprecedented 300 times.
With aggregate throughput up to 300 Mbps, PTP 600 Series solutions deliver 300% greater spectral efficiency than our nearest competitor. These systems are particularly well-suited for applications and networks that require high throughput and T1/E1 capability because they build in extra features that promote greater speed and mitigate radio-frequency (RF) interference. The T1/E1 ports mean that you can bundle circuit-switched connectivity with IP voice, video and data communications
The Motorola PTP 600 Series 5.8 and 5.4 GHz are available in the following configurations:
Integrated: With up to 300 Mbps Ethernet data rate and a built-in antenna, the PTP 600 Integrated system is the perfect choice for any environment – near- or non-line-of-sight, line-of-sight and high-interference environments – where high throughput is a major requirement and/or dual E1/T1 capability is needed.
Integrated Lite: Operating in the 5.8 and 5.4 GHz frequencies, the Lite versions of the PTP 600 Series Integrated bridges include all the same robust technology of the full-speed versions, but at less cost. They are ideal solutions in any environment where you need more speed and bandwidth than the 43 Mbps provided by the Motorola PTP 400 Series bridges and/or single E1/T1 capability is required. With up to 150 Mbps Ethernet data rate, the Integrated Lite model is software upgradeable to 300 Mbps as throughput requirements increase.
Connectorised: The Connectorised version of the PTP 600 Series bridge combines all the
innovative technology found in the PTP 600 Integrated model with the extra advantage of external
antennas. Over long distances and in extremely adverse environments, including deep non-lineof-
sight, this solution lets you connect over greater distance and at a higher level of reliability and
speed than comparable wireless bridges.
Connectorised Lite: With all the performance and reliability of the PTP 600 Series Connectorised system, this solution delivers up to 150 Mbps in extremely adverse environments – at less cost. Then as bandwidth requirements grow, you can easily upgrade from 150 Mbps to 300 Mbps.
Very High Throughput
With 256 QAM modulation, PTP 600 systems deliver a faster data stream using less of the available
5.8 GHz or 5.4 GHz frequency band. Its dual transceivers at each end of the link allow you to send
two parallel data streams at once. These transceivers can also send redundant streams, offering
much greater range compared to comparable solutions, especially over water or in non-line-of-sight
conditions.
More Range to Anywhere:
PTP 600 links have class-leading sensitivity and power output, which
enable the links to go farther, regardless of conditions. Plus, Motorola is the only manufacturer
to combine Multiple-Input Multiple-Output (MIMO), intelligent Orthogonal Frequency Division
Multiplexing (i-OFDM) and our advanced signal-processing algorithms. This combination allows the
PTP 600 Series system to create four simultaneous channels between pairs of transceivers at each
end of the link, without losing spectrum efficiency. This technique can increase signal integrity by an
unprecedented 300 times.
In non-adverse environments, each pair of transceivers can operate in parallel, in effect creating two
links and doubling throughput.
Motorola PTP 600 Series Brochure 
Motorola PTP 600 Series Technical
Home
